Staff Publications

The following list of reports, conference papers and other publications prepared by academic and research staff members within the School. For further information or details concerning the publication please contact the relevant staff member. To read the documents you will need Acrobat Reader. Follow the link if you want the latest version of Acrobat Reader.

• Galvin, Jim
• Fowler, Chris
• Hagan, Paul
• Hebblewhite, Bruce
• Laurence, David
• Roxborough, Frank
• Stothard, Phillip
• Watson, John

• Galvin, J M, Hebblewhite, B K and Salamon, M D G, 1999. UNSW Pillar Strength Determinations for Australian and South African Conditions. View in PDF format (122 kb)

Back to top of list / Back to top of page

Dr Christopher FOWLER

• Managing the hazard of wind blast/air blast in caving operations in underground mines. View in PDF format (2432 kb)
  
  
• Stothard, P M, Galvin, J M and Fowler, J C W, 2004. Development, demonstration and implementation of a virtual reality simulation capability for coal mining operations. View in PDF format (111 kb)

Back to top of list / Back to top of page

Dr Paul HAGAN

• Williams, E and Hagan, P C, 2006. Monitoring acoustic emission levels with changes in rock cutting conditions. View in PDF format (671 kb)
  
  
• Najor, J and Hagan, P C, 2006. Mine production scheduling within capacity constraints. View in PDF format (475 kb)
  
  
• Mahony, L and Hagan, P C, 2006. A study of the behaviour of reinforced elements subjected to shear. View in PDF format (251 kb)
  
  
• Hagan, P C and Mahony, L, 2006. Mechanical behaviour of reinforced elements subjected to shear, ACARP Project C12010 - Executive Summary. View in PDF format (460 kb)
  
  
• Hagan, P C, 2004. Variation in load transfer of a fully encapsulated rockbolt. View in PDF format (915 kb)

• Denny, J and Hagan, P C, 2004. The effect of fibre type and dosage rate on the performance of Fibre Reinforced Shotcrete. View in PDF format (316 kb)
  

• Hagan, P C and Weckert, S, 2004. Anchorage and failure mechanisms of fully encapsulated rockbolts - Stage 2. ACARP Project C10022 - Executive Summary. View in PDF format (231 kb)

• Hagan, P C, 2003. The effect of resin annulus on anchorage performance of fully encapsulated rockbolts. View in PDF format (1025 kb)
  
  
• Hagan, P C, 2003. The variability of some rockbolt parameters and their potential impact on anchorage performance in coal mines. View in PDF format (1202 kb)
  
  
• Hagan, P C, 2003. Observations on the differences in load transfer of a fully encapsulated rockbolt. View in PDF format (470 kb)
  
  
• Hagan, P C, 1992. The cuttability of rock using a high pressure water jet. View in PDF format (1475 kb)
  

Back to top of list / Back to top of page

Professor Bruce HEBBLEWHITE

• Status of roof bolting research at UNSW, Australia. View in PDF format (298 kb)
  
  
• Evaluation of the application of the Longwall Top Coal Caving (LTCC) method in Australia. View in PDF format (256 kb)
  
  
• Management of geotechnical risks in mining projects. View in PDF format (58 kb)
  
  
• NorthParkes Findings - The implications for geotechnical professionals in the mining industry. View in PDF format (1309 kb)
  
  
• Regional horizontal movements associated with longwall mining. View in PDF format (669 kb)
  
  
• Repeat-pass satellite radar interferometry for mine subsidence monitoring. View in PDF format (6753 kb)

Back to top of list / Back to top of page

Assoc. Prof David LAURENCE

• Classification of risk factors associated with mine closure. View in PDF format (94 kb)
  
  
• Learning safe work behaviour - a new tool for the mining industry. View in PDF format (137 kb)
  
  
• Optimising mine closure outcomes for the community - lessons learnt. View in PDF format (94 kb)
  
  
• Polymer membrane liners in underground coal mines - ground control for the millenium? View in PDF format (606 kb)

Back to top of list / Back to top of page

Emeritus Professor Frank ROXBOROUGH

• The role of some basic rock properties in assessing cuttability. View in PDF format (354 kb)

Back to top of list / Back to top of page

Dr Phillip STOTHARD

• Course design and student responses to an online PBL course in 3D modelling for mining engineerings.

Back to top of list / Back to top of page

• Boundary elements from 1960 to the present day, in BIE/BEM - the past, present and future
  
  
• Singular boundary elements for cracks and notches in three dimensions - lookup Watson under list of Authors at on-line publication link
  
  
• Strength of coal pillars

Back to top of list / Back to top of page